Should i paint over paneling

So, I decided to not only paint my wood paneling, but also to fill in the lines to make the walls smooth. Click here for more information on how I filled the lines in my wood paneling to make it look like drywall.

If you have gorgeous, solid stained wood paneling that you love, leave it! Wood accents in a home are warm and earthy, and totally in style. But, if your paneling is more of an eyesore than an accent, it may be time to paint it. In addition, sanding wood paneling will make your space dusty, creating a lot more work for you.

In addition, I always have a concern for asbestos in any home products that were made before You can do your own research on this, but suffice to say, for this reason and the ones listed above, I do not recommend sanding wood paneling prior to painting it. But, there are some exceptions to this. Painting paneling is one of them. I always recommend using a primer before painting your wood paneling.

First, primer has special adhesion elements in it that stick to the wood paneling better than paint does. If you were to just apply paint to your wood paneling, the paint would likely peel off easily if it were scratched with a fingernail or other hard object toy car, furniture, etc. Second, primer will block out any stains or dark color from the wood from seeping through the paint.

This ensures that the color of the walls is consistent. Third, using primer will enable you to use less paint. Wood paneling sucks up a TON of paint if it is not primed first. Last, if you want to be able to paint your wood paneling without sanding it first, you need to use a primer. Once you have primed your wood paneling, you can use any kind of good quality latex paint to paint it.

I tend to use Sherwin Williams Super Paint for most of my wall painting projects. I like the coverage it gives and it acts just like paint should. If your paneling has fairly shallow grooves, you may be able to just paint the whole wall with a roller. Remember, the deeper the groove on the paneling, the higher nap roller is necessary to reach inside the groove. Now, I have painted some wood paneling where the groove is just too deep for a roller to reach. In those cases, you have to use a paintbrush.

Brush all the lines, and then roll the rest. It takes much longer to do it this way, but sometimes there is just no choice. Since it takes much longer to paint the paneling with a brush and a roller, I would suggest trying to paint the paneling with a roller first.

Not only did we discover how to save money by learning how to easily paint over wood pending but we also learned to save money by painting our old house. We renovated our attic to turn into an office space, but we now have our own office out of the home. Our attic is now a playroom for the kids and a spare bedroom for guests. Try not to get carried away and sand too hard. When you're finished, wipe it down with a slightly damp cloth to remove all the dust. Note: Sanding is optional and often is not necessary.

Using a good primer that will stick to the old finish usually means you don't have to sand the wood. Just keep in mind that if the primer doesn't stick well, neither will the paint. Sanding always improves adhesion. Some paneling that appears to be wood may just be a faux melamine finish. If it is, sanding and a primer are recommended.

Check with your paint supplier for the proper primer. Apply caulk to any gaps between paneling planks, between the panels and trim, and around the windows and doors. Make sure to use "paintable" caulk. Allow the caulk to dry, as directed by the manufacturer. Use a foam sponge roller and a brush or just a brush alone to apply a thin coat of primer to all of the paneling. Make sure to cover the entire surface, including any trim. These will prevent any grease or wood stains from coming through and ruining your paint job.

When painting knotty pine, use a primer formulated to cover knots, which can bleed through several coats of paint if not properly primed. Apply a thin coat of paint to all paneling surfaces. Begin at the top and work your way down, making sure to cover all the gaps between the panels. With your brush, remove any excess paint that collects in the panel grooves.

Follow our step-by-step instructions for how to paint wood paneling, and get a new look in no time. Start by wiping wood paneling clean with a damp rag to remove any dust or dirt. If grease or other problem stains are present, remove them using a mild cleaning solution, then wipe with a clean, damp rag.

Be sure to get in the crevices of the panels, which tend to collect dirt. Make sure the wall is completely dry before moving to the next step. Putty any nail holes or other imperfections with spackling compound. Use a putty knife to best spread the compound over the holes or imperfections.

Don't worry about the color of the putty—it will dry neutral and be covered with paint. Allow the putty to dry, then sand the spackling flush with the surface. Wipe away any dust with a tack cloth. Sand the paneling with grit sandpaper using a pole sander, sanding block , or orbital sander. This will take the sheen off the finish, which will allow the paint to adhere better.

Don't get carried away and sand the surface down to the bare wood—just enough to rough up the existing finish.